With the arrival of spring, the annual spring tillage in agricultural production also follows, during which a large number of agricultural machinery will gradually be put into the spring tillage production.Farm machinery operators should pay special attention to the following points when using agricultural machinery:

1, before the use of agricultural machinery, must be in accordance with the requirements of the agricultural machinery operation manual, agricultural machinery inspection, cleaning, lubrication, debugging, fastening, replacement of parts, maintenance and other work, to ensure that agricultural machinery can be put into the best technical state of spring tillage production operations.
 

2, the spring temperature difference is still relatively large, hot and cold uncertainty, to pay special attention to the correct use of agricultural machinery cooling system.One is to continue to take anti-freezing measures on the machinery, in the night when the temperature drops below 0 degrees, the cooling water in the engine to drain, to avoid the body freezing crack;Second, when the engine is started at low temperature, it should be preheated and then started again.Thirdly, only when the engine is in normal use and the water temperature is higher than 40 degrees can the engine be operated under empty load. Only when the machine is above 60 degrees can the engine be operated under load. The normal operating temperature is between 80 and 95 degrees to reduce the engine's wear and tear.

3, for the maintenance of agricultural machinery lubrication system, according to the provisions of the filling of standard lubricating oil, in strict accordance with the lubrication system of the relevant maintenance cycle and standards, regular cleaning of agricultural machinery lubrication system, filter parts to replace regularly, in order to avoid excessive wear.