In the process of using tianyi rice transplanter, maintenance work time cannot be relaxed, especially to the idle period need storage must carefully according to the following steps and requirements of the machine to do the corresponding maintenance work:

1, clean the fuselage, tightening and refueling.Clean the whole machine, check the rust of moving parts, check whether the adjusting bolts can be adjusted freely, and replace the damaged parts in time.Add good oil (butter, oil, etc.) to each filling place, at the same time to each wire wire oil.

2. Check the engine part.See whether the air filter is unobstructed, sponge clean or not.Replace crankcase and gearbox gear oil.Drain the gasoline in the carburetor, fuel filter, etc., and turn the fuel off.

3. Check the hydraulic system.Check the degree of wear of the hydraulic belt to see whether the hydraulic oil is sufficient and clean, whether the moving parts of the hydraulic part are flexible, whether the hydraulic copy of the floating plate is sensitive, and oil to the injection place.

4. Adjust the inserted part.Fill the insert drive box, insert arm, side chain box with butter and oil.Check whether the insertion arm can operate normally, whether the gap between the seedling needle and the seedling door is correct, whether the vertical seedling quantity is normal, whether the vertical seedling is normal, whether the star wheel rotation is normal.Add butter to guide rail and check for serious wear on sliders of five seedling boxes.Check whether the plant spacing, lateral seedling quantity, insert depth adjustment handle are normal and oil filling.

5. Check the running part.Turn left and right to oil the cable.Check whether the adjustment of the gear lever is reliable;Whether the walking wheel is in normal operation.

6. Park in the hangar and cover the cloth to prevent dust from entering. Do not let the machine contact with fertilizers and other corrosive substances.Store the spare parts and tools together with the transplanter.